senseBox Sensoren

This site gives you an overview about the all blocks.


block

Temperature and humidity sensor

Connection: I2C/Wire
This block returns the measurements of the temperature and humidity sensor. Simply choose temperature or humidity in the dropdown-menu. Dropdown:
  • temperature
  • humidity
block

UV and visible light sensor

Connection: I2C/Wire
This block returns the measurements of the UV and visible light sensor. Simply choose UV-light or visible in the dropdown-menu. Dropdown:
  • UV-light
  • visible light
block

dust sensor

Connection: UART/Serial
This block returns the measurements of the dust sensor. Simply choose the value you want to measure in the dropdown-menu. Dropdown:
  • PM10
  • PM2.5
Dropdown:
  • Serial1
  • Serial2
block

air pressure sensor

Connection: I2C/Wire
This block returns the measurements of the air pressure sensor. Air pressure is measured in Pascal (Pa).
block

ultrasonic distance sensor

Connection: Digital
This block returns a distance in centimeters. When wiring pay attention to choose the connected pins in the dropdown menu.
block

sound sensor

Connection: Digital
This block returns a sound value. The value is a level between 0 an 1023. When wiring pay attention to choose the connected pins in the dropdown menu.
block

light dependant resistor

Connection: Digital
This block returns the measurements of the light dependant resistor (LDR). The value is a level between 0 an 1023. When wiring pay attention to choose the connected pins in the dropdown menu.
block

Button

Connection: Digital
This block returns the state of the wired button. The state of the button is returned as boolean and equals 1/HIGH (pressed). When wiring pay attention to choose the connected pins in the dropdown menu (for the build-in button choose pin number 0)
block

Potentiometer

Conntection: Digital
This block returns the measured values of the potentiometer. The value is a level between 0 an 1023. When wiring pay attention to choose the connected pins in the dropdown menu
block

GPS sensor

Connection: I2C/Wire
This block returns the different measurement of the GPS sensors. Longitude and latitude are displayss along with altitude and current speed (in km/h). Select the value you want to measure in the dropdown menu. Dropdown:
  • latitude
  • longitude
  • altitude
  • speed

results matching ""

    No results matching ""