senseBox:home v2 config generator

Creates the box config as commands for the serial monitor.

1. Create the config

Pick the template that matches your sensors. It fills in the fields below, which you can then change.

Sensors

SlotTypeInterval (s)Fan cleaning (days)

Upload

The AppKey is not part of the config: it's sent with its own appkey command and never leaves this page otherwise.

Channels (order = order in the frame)

#Sensor slotPhenomenonLPP chLPP type

2. Result

Send the config to the box with the serial monitor of the Arduino IDE:

  1. Connect the box over USB and open the Arduino IDE.
  2. Choose the board's port under Tools → Port, then open Tools → Serial Monitor.
  3. In the serial monitor, set 115200 baud and the line ending New Line.
  4. Copy each command below, paste it into the input field of the serial monitor and press Enter. Wait for the answer before you send the next one.