Delete the senseBox Libraries from the Sketchbook Folder

1. Now open the Arduino IDE. Go to Arduino ->Settings ...:

   

   and look in the box under `Sketchbook location 'to see where the Sketchbook folder is stored.

   

   Remember the path to this folder, ie the location where it is stored.

1. Now navigate to the sketchbook location in your file explorer (see 1.). Note that the destination folder is named 'Arduino' in the File Explorer at the sketchbook location. Open this folder. Inside the Arduino folder is a folder calledlibraries. Within this folder are the senseBox libraries. Delete the libraries folder to remove them.

   aria-hidden = "true" style = "color: # f0ad4e"> If you are an experienced Arduino user and have in the past included other external libraries that are not part of the senseBox libraries. Go to the `libraries` folder and delete all the libraries that were not external to you, rather than the delete entire folder.

2. Now completely close the Arduino program and restart it to finish deleting the old senseBox libraries.

Step 2: Integrate new board support package

To incorporate the new board support package, it's similar, as in the first steps, with a few small changes.

1. Paste the following URL in your Arduino IDE under 'Arduino->Settings ...` in the field Additional Board Administrator URLs :

   https://github.com/sensebox/senseBoxMCU-core/raw/master/package_sensebox_index.json

   An der Stelle steht im Normalfall vorher schon folgende URL: https://github.com/watterott/senseBox-MCU/raw/master/package_sensebox_index.json diese sieht der obigen sehr ähnlich, ist aber nicht die gleiche URL. Sie muss aber unbedingt durch die oben stehende URL ausgetauscht werden.

   

2. Now open the board administrator under Tools -> Board: "..." -> Board Administrator and search there for the senseBox SAMD Boards - Package.

If you click on the entry in the list, there appears an update button.

3.Click on this button and make sure that the installed version is higher than 1.1.0.

Since we regularly update the senseBox SAMD boards package for you, you should always go back to the board administrator and see if the senseBox SAMD boards package is still up to date. Open the board administrator as described above, look for senseBox SAMD boards and click there on 'update'.

Step 1: Delete the senseBox libraries from the sketchbook folder

1. Now open the Arduino IDE. Go to File ->Preferences:

   

   and look in the box under `Sketchbook location 'to see where the Sketchbook folder is stored.

   

   Remember the path to this folder, ie the location where it is stored.

1. Now navigate to the sketchbook location in your file explorer (see 1.). Note that the destination folder is named 'Arduino' in the File Explorer at the sketchbook location. Open this folder. Inside the Arduino folder is a folder calledlibraries. Within this folder are the senseBox libraries. Delete the libraries folder to remove them.

   aria-hidden = "true" style = "color: # f0ad4e"> If you are an experienced Arduino user and have in the past included other external libraries that are not part of the senseBox libraries. Go to the `libraries` folder and delete all the libraries that were not external to you, rather than the delete entire folder

2. Now completely close the program Arduino and start it again to complete the deletion of the old senseBox libraries.

Step 2: Integrate new board support package

To incorporate the new board support package, it's similar, as in the first steps, with a few small changes.

1. Paste the following URL in your Arduino IDE under File -> Preferences into the field Additional Board Administrator URLs :

   https://github.com/sensebox/senseBoxMCU-core/raw/master/package_sensebox_index.json

   Normally, the following URL already exists at this point: https://github.com/watterott/senseBox-MCU/raw/master/package_sensebox_index.json this looks very similar to the above, but is not the same URL. However, it must necessarily be replaced by the above URL.

   

2.Now open the board administrator under Tools -> Board: "..." -> Board Administrator and search there for the senseBox SAMD Boards - Package.

If you click on the entry in the list, there appears an update button.

1. Click on this button and make sure that the installed version is higher than 1.1.0.

Since we regularly update the senseBox SAMD boards package for you, you should always go back to the board administrator and see if the senseBox SAMD boards package is still up to date. Open the board administrator as described above, look for senseBox SAMD boards and click there on 'update'.